Product Catalog Cut
Specifications
Handing: All ND-Series lever locksets are non-handed.
Door Thickness: 1 5/8" to 2 1/8" (41mm–54mm) standard including Vandlgard® functions. 1 3/4" - 2" for function ND85.
Backset: 2 3/4" (70 mm) standard.
Faceplate: Brass, bronze or stainless steel. 1 1/8" x 2 1/4" (29 mm x 57mm) square corner, beveled.
Lock Chassis: Zinc plated for corrosion resistance.
Latch Bolt: Steel, 1/2" (12mm) throw, deadlocking on keyed and exterior functions.
Exposed Trim: Levers: Pressure cast zinc, plated to match finish symbols.
Roses: Brass, bronze or zinc.
Strike: ANSI curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder & Keys: 6-pin Everest 29 S123 or C123 keyway standard with two patented nickel silver keys per lock.
Warranty: Ten-year limited for all functions including Vandlgard.
Certifications
ANSI: Meets or exceeds A156.2 Series 4000, Grade 1 strength and operational requirements. Meets A117.1 Accessibility Code.
Federal: Meets FF-H-106C Series 161.
California State Reference Code: (Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2" (64mm) returns comply; Schlage levers return to within 1/2" of door face.All levers with less than 1/2" (64mm) returns comply with California Fire Safety Codes.
MEA Certification: All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).
Florida Building Commission: 3/4" and 1/2" throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL: All locks listed for A label single doors, 4' x 8'. Letter F and UL symbol.
ADA Compliant: Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act.